I got estimates from four companies. Patriots' Pride was the least expensive by far. The 7400 series windows were built and installed in less than four weeks. Highly recommend, especially for veterans.

Siding Replacement in
Powder Springs, GA
Full-replacement only. James Hardie fiber cement, Everlast composite, Royal and Mastic vinyl, plus stone veneer. Trim, soffit and fascia included. Veteran-owned, manufacturer-direct and lifetime (material & labor) — serving Powder Springs and Cobb County with one honest number on a signed timeline.
Siding Replacement for Powder Springs homes
Across Cobb County, Patriots' Pride has built its name on a single idea: siding handled by the people who actually do the installing. No marketing-machine markup, no pressure — one fair price on a signed timeline. Powder Springs is about 89 miles southeast of our Chattanooga headquarters, with our metro-Atlanta office even closer to this side of the market — well inside the area we cover every week, with no trip charge.
Powder Springs housing runs to 1980s–90s subdivision homes on generous lots, with newer infill and townhomes near the revitalized downtown — and each of those calls for a different siding approach. Because we're manufacturer-direct on James Hardie, Everlast, Royal, Mastic, we fit the product to your home instead of pushing the one line we're locked into.
Beating summer sun, months of humidity and the wind that comes with spring storms are hard on a home's exterior here. A full James Hardie or composite siding system protects Powder Springs homes against all three — and won't rot, warp or fade like worn-out cladding.
Powder Springs neighborhoods we serve
We install siding throughout Powder Springs, including Historic Downtown Powder Springs, Country Walk, Amberton and the Brownsville Road neighborhoods. Older historic homes and newer subdivisions alike get the same measured, manufacturer-direct install and the same signed timeline.
What we find on Powder Springs homes
With 16,887 residents at the 2020 census, Powder Springs is big enough to have several distinct housing eras sitting side by side.
Powder Springs's housing stock is 1980s–90s subdivision homes on generous lots, with newer infill and townhomes near the revitalized downtown — and that mix is what decides the scope of a siding job here more than anything on a price sheet.
On Powder Springs's 1970s-1990s homes, the starting point is typically original vinyl or hardboard siding that has chalked, cracked or delaminated at the bottom courses.
On Powder Springs's 2000s and newer homes, the starting point is typically builder vinyl that has faded unevenly on the sun-facing elevations.
Around Historic Downtown Powder Springs, Country Walk, Amberton and the Brownsville Road neighborhoods, we are usually working on the same handful of eras, so our measurements and lead times are set against homes we have already opened up. A Historic Downtown Powder Springs house and a newer build on the edge of town are two different jobs, and we quote them that way.
Because Powder Springs carries a historic district, exterior changes on some of these homes go through review before work starts. We measure for a unit that satisfies the guideline the first time rather than submitting twice.
- 1970s-1990s homes — failed insulated-glass seals showing as fog between the panes, sliders that jump their track, and daylight at the meeting rail.
- 2000s and newer homes — balance hardware and insulated-glass seals reaching end of life at roughly 15 to 20 years, well before the frame looks worn out.
Powder Springs pricing
In line with the regional average, siding projects in Powder Springs typically run $12,000 – $25,000 typical. Your exact figure depends on size, product line and configuration — delivered as one honest, itemized number at your free estimate, with 0% and extended financing available.
Permits & Cobb County
When your siding project requires a permit, we pull it through the Cobb County building department as part of full service. As a historic-district community, Powder Springs may require additional review on some homes — we handle that too.
Why Powder Springs chooses Patriots' Pride
What Powder Springs homeowners can count on, every job:
- Veteran-owned, 4th-generation installers. The owners are still on the truck — no 10-step pitch, no 2-hour sit-down.
- Manufacturer-direct on every brand: James Hardie, Everlast, Royal, Mastic.
- Signed timeline + lifetime (material & labor) warranty, $2M insured, backed by the Patriot's Promise.
- Hometown Hero: 50% off exterior doors for Powder Springs-area service members and first responders.
Also in Powder Springs
Nearby areas we serve
Powder Springs trusts us.
5.0 stars across 118 verified Google reviews. Best of the Best 2024 & 2025 — Chattanooga Times Free Press.
Hardie board on our entire house. FANTASTIC job at an unbelievably low price. Ashton was onsite every day. Above all — unquestionable integrity. They earn the name Patriot's PRIDE.
True craftsmanship is a rarity. As an engineer, I notice detail — and there wasn't a thing they could pull over my eyes. So refreshing. We'd recommend Patriots to everyone we know.
Siding in Powder Springs, answered.
Siding done
right in Powder Springs.
Free estimate, signed timeline, owner-led. Serving Powder Springs, Cobb County and the wider Georgia market.
