Kenny gave us all our options for windows and doorwalls, introduced the crew on install day, and did a walk-through after. A few small issues were addressed right away. 100% recommend.

Siding Replacement in
Fort Payne, AL
Full-replacement only. James Hardie fiber cement, Everlast composite, Royal and Mastic vinyl, plus stone veneer. Trim, soffit and fascia included. Veteran-owned, manufacturer-direct and lifetime (material & labor) — serving Fort Payne and DeKalb County with one honest number on a signed timeline.
Siding Replacement for Fort Payne homes
When a Fort Payne homeowner calls Patriots' Pride about siding, a true 4th-generation installer picks up — not a commissioned closer. We measure, hand you one honest itemized number, and put your install dates in writing. Fort Payne is about 48 miles southwest of our Chattanooga headquarters — well inside the area we cover every week, with no trip charge.
Fort Payne housing runs to Queen Anne, American Foursquare and Craftsman bungalows in the NRHP-listed residential historic district, mid-century ranches throughout the central valley, and brow-lot homes on the Lookout Mountain edge — and each of those calls for a different siding approach. Because we're manufacturer-direct on James Hardie, Everlast, Royal, Mastic, we fit the product to your home instead of pushing the one line we're locked into.
Beating summer sun, months of humidity and the wind that comes with spring storms are hard on a home's exterior here. A full James Hardie or composite siding system protects Fort Payne homes against all three — and won't rot, warp or fade like worn-out cladding.
Fort Payne neighborhoods we serve
We install siding throughout Fort Payne, including the Fort Payne Residential Historic District, DeSoto Falls Road, Sand Mountain and the neighborhoods along US-11. Older historic homes and newer subdivisions alike get the same measured, manufacturer-direct install and the same signed timeline.
What we find on Fort Payne homes
Fort Payne is a 14,877-resident town as of the 2020 census, which means a housing stock that turned over in waves rather than all at once.
Incorporated in 1889, it has a genuine 19th-century core — and those openings are rarely square by the time we see them.
Fort Payne's housing stock is Queen Anne, American Foursquare and Craftsman bungalows in the NRHP-listed residential historic district, mid-century ranches throughout the central valley, and brow-lot homes on the Lookout Mountain edge — and that mix is what decides the scope of a siding job here more than anything on a price sheet.
On Fort Payne's pre-1940 homes, the starting point is typically original wood siding under several generations of paint, often with lead-bearing layers below.
On Fort Payne's 1940s-1960s homes, the starting point is typically original wood or early asbestos-cement cladding that is brittle and no longer holds paint.
Around the Fort Payne Residential Historic District, DeSoto Falls Road, Sand Mountain and the neighborhoods along US-11, we are usually working on the same handful of eras, so our measurements and lead times are set against homes we have already opened up. A the Fort Payne Residential Historic District house and a newer build on the edge of town are two different jobs, and we quote them that way.
Because Fort Payne carries a historic district, exterior changes on some of these homes go through review before work starts. We measure for a unit that satisfies the guideline the first time rather than submitting twice.
- Pre-1940 homes — sash cords that have long since failed, glazing putty that has gone to powder, and rot starting at the sill horns.
- 1940s-1960s homes — frames that conduct heat straight through the wall, winter condensation running down onto the sill, and sashes painted shut.
Fort Payne pricing
In line with the regional average, siding projects in Fort Payne typically run $12,000 – $25,000 typical. Your exact figure depends on size, product line and configuration — delivered as one honest, itemized number at your free estimate, with 0% and extended financing available.
Permits & DeKalb County
When your siding project requires a permit, we pull it through the DeKalb County building department as part of full service. As a historic-district community, Fort Payne may require additional review on some homes — we handle that too.
Why Fort Payne chooses Patriots' Pride
Here's what a Fort Payne homeowner gets with Patriots' Pride that a sales-first competitor won't match:
- Veteran-owned, 4th-generation installers. The owners are still on the truck — no 10-step pitch, no 2-hour sit-down.
- Manufacturer-direct on every brand: James Hardie, Everlast, Royal, Mastic.
- Signed timeline + lifetime (material & labor) warranty, $2M insured, backed by the Patriot's Promise.
- Hometown Hero: 50% off exterior doors for Fort Payne-area service members and first responders.
Also in Fort Payne
Nearby areas we serve
Fort Payne trusts us.
5.0 stars across 118 verified Google reviews. Best of the Best 2024 & 2025 — Chattanooga Times Free Press.
I got estimates from four companies. Patriots' Pride was the least expensive by far. The 7400 series windows were built and installed in less than four weeks. Highly recommend, especially for veterans.
True craftsmanship is a rarity. As an engineer, I notice detail — and there wasn't a thing they could pull over my eyes. So refreshing. We'd recommend Patriots to everyone we know.
Siding in Fort Payne, answered.
Siding done
right in Fort Payne.
Free estimate, signed timeline, owner-led. Serving Fort Payne, DeKalb County and the wider Alabama market.
